SL Nano Classicmount
Product number:
i2277
Product information "SL Nano Classicmount"
With the Classicmount, the SL Nano can be mounted on fork crowns with a hole. An M6 x 35 screw is supplied for mounting.
Combined with the classicmount, the wired remote control should have a minimum length of 67cm.
Combined with the classicmount, the wired remote control should have a minimum length of 67cm.
Properties "SL Nano Classicmount"
| Lamp Holder: | Fork Crown |
|---|---|
| Lamp Type: | E-Bike light |
| Material: | Aluminium CNC-milled (6061-T6), black anodised |
| Suitable for: | SL Nano Classic |
Delivery content "SL Nano Classicmount"
- Classicmount for SL Nano
- Aluminium adapter M6 oblong hole
- 4 screws
Login
Wired Remote Control for E-Bike
€22.00*
Cable Length:
67 cm
|
Suitable for:
SL Nano (without Bluetooth)
Wired remote control with high beam in various lengths for out e-bike lights (SL F, SL X and SL Nano). Cable length is measured from lamp to remote control. The remote control is 14 mm wide.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
Wired Remote Control for E-Bikes (Peppi Edition)
€25.00*
Cable Length:
67 cm
|
Suitable for:
SL Nano (without Bluetooth)
Wired remote control on Peppi with high beam in various lengths for our e-bike lights (SL F, SL X and SL Nano). Cable length measured from lamp to remote control.The Peppi enables quick and uncomplicated installation. Despite the possible additional support on Shimano brakes, the button can be mounted close to the handle. With the additionally available Peppi V5 XL, the remote control can also be attached to racing bike handlebars or handlebars with a larger diameter.The width of the Peppi is 13.4mm, the dimensions of the remote control are 20x25x7mm. The remote control can be replaced with the plug on the cable itself.
_________________________________________________________________________________
Note:Not compatible with the bluetooth version of the SL Nano.In combination with the Classicmount, a minimum length of 67cm is required.
SL Nano E-Bike Classic
€228.00*
Highbeam:
with Highbeam
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown. 700 lumens low beam light up the street without blinding oncoming traffic. The 1000 lumens high beam has a range of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant. The SL Nano is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automaticallywhen the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.Length remote control cable: 67cm_________________NOTE:The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection:Motor Connection Cable for E-Bikes (Frontlight)
Variants from €148.00*