SL Nano E-Bike Classic
Product number:
i7900CL
Product information "SL Nano E-Bike Classic"
The SL Nano Classic for E-Bikes with StVZO-approval to mount on the forkcrown.
700 lumens low beam light up the street without blinding oncoming traffic. The 1000 lumens high beam has a range
of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between
low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is
made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant.
of up to 250 m. The remote control is connected to the 52g light lamphead via cable, it allows you to switch between
low beam and high beam. The symbols light green or blue, depending on the mode that is active. The housing is
made from CNC-milled aluminum and therefore especially sturdy, longliving and heat resistant.
The SL Nano is also waterproof and impact resistant according to IK09 and IP67. The lamp switches on automatically
when the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.
Length remote control cable: 67cm
_________________
when the motor of the e-bike is started. To switch it off, press and hold the button on the remote control.
Length remote control cable: 67cm
_________________
NOTE:
The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection:
Motor Connection Cable for E-Bikes (Frontlight)
The light cable of the SL Nano has a Shimano connection. Please order the light cable with the appropriate motor connection:
Motor Connection Cable for E-Bikes (Frontlight)
Properties "SL Nano E-Bike Classic"
| Bluetooth: | without Bluetooth |
|---|---|
| Colour Temperature: | 6000 Kelvin (daylight) |
| Lamp Holder: | Fork Crown |
| Lamp Type: | E-Bike light |
| Lumens: | 1000 lumens |
| Lux: | 140 Lux |
| Measurements: | 41x30 mm |
| Protection Class: | IP 09 (impact resistance), IP 67 (water resistance) |
| Range: | 250 m |
| StVZO Approval: | Yes (~K1797) |
| Weight: | 52 g |
Delivery content "SL Nano E-Bike Classic"
- SL Nano Classic with Mount
- Lightcable
- Wired Remote Control
- Screw for Remote Control
- Hex Key 1.5
- Stardrive Key 15
- Instructions
Compability "SL Nano E-Bike Classic"
Login
Motor Connection Cable for E-Bikes (Frontlight)
€17.00*
Motor:
Bosch
Short light cable with motor connection and plug connector for mounting an e-bike light on a light cable already laid in the frame. Suitable for lightcable extension 2.0 & 3.0.Please ensure the correct plug connection -> see note._________________________________________NOTE: Light cable 1.0: Lamp models up to August 2021 are equipped with a continuous light cable without a plug connection.Light cable 2.0: Since August 2021, all light cables on e-bike lights have a plug connection on the light cable, as well as a small light cable with the matching motor connection.Light cable 3.0: Since March 2024, the plug connection of the e-bike light cable has been converted to a 2-pin coaxial plug connection.
C14 (Taillight for E-Bikes)
€89.00*
Brake Light:
with Brake Light
|
Diameter Seat Clamp:
34.9 mm
The C14 rear light from Lupine is the first rear light for e-bikes that is integrated into the saddle clamp and approved by the StVZO. Optionally with brake light function. Due to a G-sensor, the C14 detects when braking and lights up brighter for a short time. The 45 lumen rear light is made of black anodised CNC-milled aluminum, the lens of robust polycarbonate. The C14 is impact-resistant and can withstand heavy splashes of water (IPX6). Though COB technology and Fresnel lenses, the C14 achieves high visibility in road traffic while reducing glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous lighting characteristic. The C14 is inherently compatible with Shimano motors. Included in the delivery are 3 cable guides for attaching the cable to the bicycle frame.Through pressing the button on the bottom, the C14 can easily be switched off.___________________________________________________________________________________Note:For installation on Bosch, Brose and Yamaha motors, please also order the appropriate adapter cable. The light cable on the C14 is 1 metre long, the adapter cables are 13 cm long.
Variants from €78.00*
C14 G (Rack Version)
€69.00*
Brake Light:
with Brake Light
The C14 red light for e-bikes as a luggage carrier version. Optionally with brake light function. Due to the G-sensor, the C14 detects braking and lights up brighter for a short time.The 45-lumen taillight is made of black anodised CNC-machined aluminium, the optics of robust polycarbonate. The C14 G is impact-resistant and waterproof according to IPX6. Thanks to the latest COB technology and powerful Fresnel lenses, the C14 G achieves all-round high visibility with reduced glare. The special arrangement of the 14 LEDs and a sophisticated lens system also create a particularly homogeneous light characteristic. The C14 G is connected directly to the motor of the e-bike and is compatible with all current e-MTBs. An
adapter cable is required for installation on Bosch, Brose and Yamaha motors. This has a length of 13 cm. The C14 G is StVZO-approved and has a mounting width of 50mm.
Variants from €59.00*
Lightcable Connector Set
€2.00*
Cable connector for joining together an already separated light cable for e-bikes.The included foam tunnel prevents any rattling in the frame.Waterproof connection due to grease filling.
Light Cable Cableguide
€5.00*
With the self-adhesive cable guide the C14 light cable can be led cleanly from the seat tube to the engine of your e-bike. The soft 3M adhesive pad ensures that the clamp can be easily attached to slightly curved surfaces. The cable guide is also ideal for attaching the cable of the SL remote controls directly to the handlebars.
Knipex Wire Stripper
€27.00*
The Knipex wire stripper strips cables without manual adjustment. The pliers are already adjusted to our e-bike cables (and can still be used on any other type of cable). Compact, handy and lightweight tool for common cable cross sections and insulation materials.Housing: plastic, glass fiber reinforcedBlade: special tool steel, oil-hardened, replaceable