Versandkostenfrei: Deutschland ab 50€ / Weltweit ab 250€
Hotline +49 9181 509 490

358,00 €*

Sofort verfügbar, Lieferzeit 2-5 Tage

Produktnummer: i6306
Produktinformationen "SL Nano AF Canyon"
The SL Nano AF Canyon - special mount for attaching on Canyon Aero handlebars. Developed in Cooperation
with Canyon, compatible with all Canyon aero cockpits except H11/H36. Conversion to mounting with quick release
is possible. The SL Nano AF is a small, lightweight StVZO-approved bicycle lamp with 1200 lumens high beam,
700 lumens low beam, daytime running light function, external battery and Bluetooth remote control.

The SL Nano AF is mounted with the quick release. The 5.0 Ah SmartCore battery is attached to the top or bottom tube
of the frame with the enclosed coated velcro tape. In the dark the lamp switches automatically from daytime running
light to low beam. The remote control can then be used to switch between low and high beam and is mounted to the
handlebar with the Peppi holder.
Eigenschaften "SL Nano AF Canyon"
Akku: 35 Wh / 5.0 Ah SmartCore
Akkuhalterung: mit Klettband am Rahmen
Akkusystem: 7.2 V
Farbtemperatur: 6000 Kelvin (Tageslichtweiß)
Fernlicht: mit Fernlicht | Bluetooth Fernbedienung
Gewicht: 52 g
Ladezeit: 2:40 h (5.0 Ah)
Lampenart: Fahrradbeleuchtung
Leuchtdauer: 2:30 h (5.0 Ah)
Leuchtdauer Max: 4:20 h (5.0 Ah)
Lumen: 1200 Lumen
Lux: 140 Lux
Maße: 41x30 mm
Reichweite: 250 m
Schutzklasse: IK 09 (Schlagfestigkeit), IP 67 (Wasserdichtigkeit)
StVZO-Zulassung: Ja (~K1797)
Lieferumfang "SL Nano AF Canyon"
  • Lamphead SL Nano AF with Bluetooth remote control
  • handlebar holder for Bluetooth remote control "Peppi V5 XL (32mm)".
  • 5.0Ah SmartCore battery
  • Aero holder
  • Charger Wiesel
  • hook&loop strap long
  • hook&loop strap short
  • Stardrive key 5 and hex key 3mm
  • Manual

0 von 0 Bewertungen

Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


Recommended

SL Nano Canyon Aero Mount
SL Nano lamp mount for aero handlebars from Canyon (Canyon CP10/CP12 Aerocockpit). Suitable for mounting the SL Nano (SL Nano AF) with or without bike computer directly under your aero handlebar. The black anodized aluminum holder is mounted with two screws directly below the handlebar.Developed in collaboration with Canyon, compatible with all Canyon aero cockpits except H11/H36.

25,00 €*
Hex Key 2.5 mm
With this hex key you can open the screws of your Penta, to mount it to another headband for example.Size: 2.5 mm

0,30 €*
Wiesel Adapter Cable
Adapter cable for continuous operation of a lupine with the wiesel charger (up to 7W)

12,00 €*
GoPro Mount Spacer
Lupine Spacer with GoPro mount: 10mm high, inner diameter: 1 1/8 inches, aluminum black anodized, incl. M4 locking screw.Not compatible with the original GoPro mount. An adapter is also required for lamp mounting.

18,00 €*
Barmount Peppi V5 XL
Peppi V5 XL handlebar mount with EPDM insert for best grip, compatible with all Lupine remote controls.Maximum Bar Diameter: 32 mmWidth: 16.4 mmStrap Length: 85 mm

12,00 €*
Extension Cable
Kabellänge: 60 cm
Extension cable in 20 cm/30 cm/40 cm/50 cm/60 cm/120 cm length for all types of lamps except Alpha.For Alpha extension cable see "Recommended".

19,00 €*
Battery Mount Rolf V1
The battery holder can be mounted instead of the bottle holder. Our HardCase and SmartCore batteries can now be mounted without hook&loop strap.Depending on the position of the bottle cage, the use of an extensioncable may be necessary.

8,00 €*
USB One
The USB One can be used to charge devices with an USB charging cable on a Lupine battery (smartphone, red light, Penta, etc).To do this, connect the USB One between the charging cable and the battery.Note:It is not possible to charge a Lupine battery using the combination of USB One, USB Charger and another battery.

22,00 €*
SL Nano AF Quickrelease Mount
Lenkerdurchmesser: 31.8 mm
Quickrelease mount for SL Nano for mounting on bars with fitting diameter. It is made of CNC-milled, black anodised aluminium.The rubber pad prevents scratches and ensures a firm hold.Distance from the mounting hole of the holderscrew to the edge approx. 15 mm, clamp width 7 mm.

34,00 €*